Tech
Researchers 'Print' Polymers that Bend into 3-D Shapes
Staff Reporter
First Posted: Mar 09, 2012 11:31 AM EST
Christian Santangelo, Ryan Hayward and colleagues at the University of Massachusetts Amherst recently employed photographic techniques and polymer science to develop a new technique for printing two-dimensional sheets of polymers that can fold into three-dimensional shapes when water is added. The technique may lead to wide ranging practical applications from medicine to robotics.
The journal Science publishes the research in its March 9 issue.
Researchers used a photomask and ultraviolet (UV) light to "print" a pattern onto a sheet of polymers, a technique called photolithography. In the absence of UV exposure, the polymer will swell and expand uniformly when exposed to water, however when polymer molecules within the sheet were exposed to UV light they became crosslinked--more rigidly linked together at a number of points--which prevented them from expanding when water was added. Patterning the amount of crosslinking across an entire sheet allowed researchers to control how much each area swelled. A second exposure to a carefully selected pattern of UV light allowed them to create specific 3-D shapes.
The work, supported by National Science Foundation (NSF) Faculty Early Career Development and Materials Research Science and Engineering Centers awards, is a collaborative effort between polymer engineering and physics, with both theoretical and experimental aspects.
"This paper reports an interesting fusion of experimental technique and theory to develop an innovative method for making self-actuating materials that will assume a desired three-dimensional shape," said Daryl Hess, a program director in the division of materials research at NSF.
Source: National Science Foundation
See Now:
NASA's Juno Spacecraft's Rendezvous With Jupiter's Mammoth Cyclone
©2024 ScienceWorldReport.com All rights reserved. Do not reproduce without permission. The window to the world of science news.
More on SCIENCEwr
First Posted: Mar 09, 2012 11:31 AM EST
Christian Santangelo, Ryan Hayward and colleagues at the University of Massachusetts Amherst recently employed photographic techniques and polymer science to develop a new technique for printing two-dimensional sheets of polymers that can fold into three-dimensional shapes when water is added. The technique may lead to wide ranging practical applications from medicine to robotics.
The journal Science publishes the research in its March 9 issue.
Researchers used a photomask and ultraviolet (UV) light to "print" a pattern onto a sheet of polymers, a technique called photolithography. In the absence of UV exposure, the polymer will swell and expand uniformly when exposed to water, however when polymer molecules within the sheet were exposed to UV light they became crosslinked--more rigidly linked together at a number of points--which prevented them from expanding when water was added. Patterning the amount of crosslinking across an entire sheet allowed researchers to control how much each area swelled. A second exposure to a carefully selected pattern of UV light allowed them to create specific 3-D shapes.
The work, supported by National Science Foundation (NSF) Faculty Early Career Development and Materials Research Science and Engineering Centers awards, is a collaborative effort between polymer engineering and physics, with both theoretical and experimental aspects.
"This paper reports an interesting fusion of experimental technique and theory to develop an innovative method for making self-actuating materials that will assume a desired three-dimensional shape," said Daryl Hess, a program director in the division of materials research at NSF.
Source: National Science Foundation
See Now: NASA's Juno Spacecraft's Rendezvous With Jupiter's Mammoth Cyclone